This is a project I was asked to help with by a friend of mine. The wood pieces are 12" long- I had them cut from a larger piece purchased at Home Depot, and they cut it down for me. I used eye screws to link the pieces together. I hammered a nail into the wood to make a hole to screw the eye screws in. The only thing that is missing is that I recommended my friend to use some ribbon at the top to act as a hanger- and add a bit of pretty to offset the dark colors. You basically nail a regular picture hanger in the back of the wood to hang it by, and then glue ribbon to the back and attach it to the wall with a small pin so it looks like it's hanging by the ribbon but it's not. She chose the words "smile, relax, home" because they had significant meaning to her. The colors match the colors of her bedroom- I don't think I'd normally use a dark color to have writing on it because it's hard to see. I painted the wood and then used Cricut vinyl letters to trace around, then peeled them off and filled it in with black paint. I used a piece of sand paper to distress it, then sealed with a clear top coat. So, she's happy with the colors- personally I might have used black vinyl letters, but it's not for me, and I'm always critical of things I've made. I took pictures of the steps, probably not necessary, but I personally like seeing pictures, so maybe somebody else might too.
Sunday, November 14, 2010
Laundry sign
Have I mentioned that I love what you can do with a piece of wood? What I did: took a piece of wood and painted a base coat (bottom), then crackling medium, then a white top coat. I then used my Cricut to cut out vinyl words to go on the sign- this idea I've gotten from several blogs, so I can't specifically say which one, because I've seen it done in a variety of ways. How could you make it easier? Forget the crackling step, and just paint your wood the color you want. You could sand it a little to distress it, but that's not even necessary unless you really want to. I think I might donate this to our MOPS auction that we have in the spring.
Tuesday, November 9, 2010
Altered Paint Can
I found this can of sorts in Craft Warehouse- there are varieties that are completely metal (more traditional paint can, versus the shape, but not the function of this particular kind). I've had this sitting in my craft stash for a couple of years now, and I've been seeing versions of them all over the internet, I just hadn't had the motivation to do it, until not. Instead of covering the outside with paper, I placed it on the inside instead, and didn't need adhesive. You can switch it out to whatever you want inside. I measured around the outside with my measuring tape to see how long I'd need the paper, and also measured how high the can was too. I took about a 1/2 inch off of the height measurement so I wouldn't have to try and jam it under the lip of the can. I needed 2 pieces of paper to fit the inside, since my 12 inch paper was not long enough, so I just stuck a shorter piece onto the longer one and rolled the entire piece up, then popped it inside the can. As it unrolls you can push it along the sides to fit better. If you'd like you can add more adhesive at the ends to keep it still, but I don't mind how it looks. I used a corner rounder to make a scallop at the top, then inked it. I like how it turned out, it makes it a little prettier to me. I used my Cricut to cut out an initial out of vinyl, then stuck it on the outside, and added a few simple pretties to it, along with some flowers and buttons. I tied ribbon scraps to the handle to color it up just a little more. At that point, I just filled it with scrapping goodies for a friend. We made a simpler version of this for our MOPS table centerpieces this year. I cut out paper in the same fashion, then added a little cut out with this year's theme on it. We tied coordinating ribbon to the handles, then made flower pens and put them in the inside of the can for the ladies to take notes with during the meetings. We'll be able to reuse the containers with other papers if we want to, since we didn't stick anything on the outside (unlike this present for a friend in which I used the vinyl and the flowers/buttons.). Sooo, the moral of this story is: don't be daunted, these can be fun and simple little goodie containers, and easy enough to make. OOh, and I now apologize for the ugly dirty window tracks behind the can in the pictures, ICK! Note to self: clean those window sills and tracks!
Sunday, October 17, 2010
Another wood block photo holder
I played around with another set of these today, for a second example for the MOPS craft coming up a week from Thursday. I set the blocks horizontally instead of vertically, but they can be set however you want. I will mention the site, again, that I found this idea from, because I know that if this is something that appeals to you, you'll love the 2x4's section of craft ideas on http://www.howdoesshe.com/ . I think I like this set better than the first one I did :)
Sunday, September 12, 2010
Fall Blessings/Give Thanks Wood block decor
I decided to try this out in the same manner I did the wood blocks for the photo holder craft, it was all looking good ( to me) until I inked.. now I'm not so thrilled with it, even though it does add a bit more to it. Don't you just hate it when you are making something and you're liking the way it looks, and add just ONE more detail, and it's a commitment detail that you can't really undo, and then you don't like it much after that point. Bah!!! Anyway, I used extra scraps of wood left over from the wood photo holder project. I can use it for early Fall and then around Thanksgiving too...
Wednesday, September 8, 2010
Welcome/schedule sign- frame/glass/vinyl, fabric
Well, I finally finished it- the new sign we'll be using for our MOPS group (if you want to know more, check out http://www.mops.org/ ). I used a 24" x 30" frame. I used spray glue to attach fabric to the back of the frame, ribbon with Terrifically Tacky Tape, and used my Cricut to cut out the vinyl for it. I tell ya, trying to make sure everything was even and not all wonky was a challenge ( I did not use the Transfer Paper they recommend using with vinyl, I'm cheap... ) It was intimidating working on such a big scale, and I've only used vinyl on a very small glass frame. I want to do a lot more now that I've tried it. I think making just a welcome sign or a sign with our last name and "est. 1994" (when we were married) would be cool too, especially with a fabric background. Lots of fun! If I had the room, something of this size could be cool for a daily schedule... lots of possibilities!
Sunday, September 5, 2010
"My Blessings" wood photo holder
I found this idea on http://www.howdoesshe.com/ - a really cool blog, there's lots of fun wood projects on there. I want to try more. We'll be doing this for October's craft in the MOPS group I'm involved in. If you're interested in MOPS, you can check it out at http://www.mops.org/ - MOPS is a great opportunity for support and connection with other moms. This picture shows what I did for the example for the group, and therefore can be finished in the given time we have for crafts for that meeting. I plan on doing another one (or more :) for gifts), and I think I'll maybe paint the blocks and sand and ink around the edges, but I didn't want to add too many extra steps for the meeting. It felt good to craft again, I've been busy with summer and kids and such, along with working on another mini album for a friend, so it felt good to whip this out. It comes together really fast!
Subscribe to:
Posts (Atom)
